The Peptide CommonsEst. May 2024
Independent. We sell nothing and are affiliated with no manufacturer or pharmacy. Every moderation action is logged in public
Topic summary

Carryover and the ghost peak from last week's standard

This is a generated summary. It shows the 9 most-liked posts from a topic of 93, in their original order, with the accepted answer included where one exists. It is a reading aid and it will miss nuance — the full topic is the record.
JA
j.asanteTL2 Moderator1 Apr 2025#7

post #6 is right about the mechanism and I think understates the practical bit.

Column chemistry and particle size: smaller particles (1.7 μm) give better resolution and higher efficiency than larger particles (3.5 μm or 5 μm), at the cost of higher back pressure. Newer methods increasingly use smaller particles.

33 likes 16mo
YI
y.ibarraTL2 Moderator2 Apr 2025#15
k.brandl_de, post #12: Peak purity: a diode-array detector records a spectrum at every time point. If a peak contains two co-eluting species with different spectra, the spectrum changes across the peak. A passing peak-purity result says the spectrum is constant; it is weak evidence of homogeneity if the impurities have similar spectra. Go to post

Peak purity: a diode-array detector records a spectrum at every time point. If a peak contains two co-eluting species with different spectra, the spectrum changes across the peak. A passing peak-purity result says the spectrum is constant; it is weak evidence of homogeneity if the impurities have similar spectra.

32 likes in reply to #12 16mo
BD
b.dumitruTL2 Moderator3 Apr 2025#22

Worth separating two things that post #18 runs together.

Area percent is not mass percent. It is a proportion of absorbance, weighted by each species' extinction coefficient. For closely related impurities the approximation is usually good. For structurally dissimilar impurities it can be poor.

31 likes 16mo
BI
blank_injectionTL2Analytical chemist4 Apr 2025#29

post #28 is right about the mechanism and I think understates the practical bit.

Thank you for the correction. I have edited my earlier post with a note rather than silently, so the thread still makes sense to read. The error was mine and it was the kind that comes from remembering a figure instead of looking it up.

30 likes 16mo
M
MJayawardenaTL3Regular5 Apr 2025#31

Column chemistry and particle size: smaller particles (1.7 μm) give better resolution and higher efficiency than larger particles (3.5 μm or 5 μm), at the cost of higher back pressure. Newer methods increasingly use smaller particles.

28 likes 16mo
AK
a.kravchenkoTL2 Moderator6 Apr 2025#40

Picking up post #37: that is the part I would want checked first.

Thank you for the correction. I have edited my earlier post with a note rather than silently, so the thread still makes sense to read. The error was mine and it was the kind that comes from remembering a figure instead of looking it up.

27 likes 16mo
TI
t.ibarraTL2 Moderator7 Apr 2025#45
a.eriksen, post #43: post #42 is right about the mechanism and I think understates the practical bit. Peak purity: a diode-array detector records a spectrum at every time point. If a peak contains two co-eluting species with different spectra, the spectrum changes across the peak. A passing peak-purity result says the spectrum is constant; it is weak… Go to post

Before anything else: what was the gradient, and at what wavelength? Area percent at different wavelengths is not the same number even on the same sample because different species absorb differently at different wavelengths. With the method stated, I can tell you something useful. Without it, all I can say is that there is one large peak.

27 likes in reply to #43 16mo
BN
bench_notesTL4 Moderator8 Apr 2025#53

On integration: where the baseline is drawn matters more than most people realise. On a clean chromatogram with well-resolved peaks the choice is inconsequential. On a chromatogram with a trailing shoulder or a rising baseline it matters. Differences of one to two percentage points between defensible integrations are ordinary.

31 likes 16mo
OA
o.abrahamsenTL3Regular12 Apr 2025#89

Reversed-phase separates on hydrophobicity. A peptide is retained on a non-polar stationary phase and eluted by increasing organic solvent. For peptides the mobile phase almost always contains an ion-pairing acid, typically 0.1% TFA, which suppresses secondary interactions and sharpens peaks.

33 likes 16mo

Read the full topic (93 posts)

Suggested topics

TopicParticipantsRepliesViewsActivity
Area percent versus weight percent: the confusion that causes most arguments
Posting this under the heading it deserves: Area percent versus weight percent: the confusion that causes most arguments Everything below is what sits behind that. Posting the method first, because I know…
ADSVCDFNAD+10 14 2.1k 2mo
Why I ask for the gradient before I discuss the number
The question in the title: Why I ask for the gradient before I discuss the number I will give what I have already checked below so nobody repeats it. I would like to understand what this number means before I…
GPSFCNNDHK+35 39 4.9k 20mo
Coming back to: Where the integrator drew the baseline, and how much it moved the number
On the subject in the title: Where the integrator drew the baseline, and how much it moved the number Working notes rather than a conclusion. Posting the method first, because I know what the first three…
AHNMTNAFMB+20 24 2.7k 10mo
Revisiting: Why I ask for the gradient before I discuss the number
Posting this under the heading it deserves: Revisiting: Why I ask for the gradient before I discuss the number Everything below is what sits behind that. I would like to understand what this number means…
DNIDGHECFA+15 19 43k 10mo
Column chemistry choices for a 40-residue peptide
Column chemistry choices for a 40-residue peptide — setting out what I have, and where I think it stops being reliable. Posting the method first, because I know what the first three replies will otherwise be.…
SRDWZVGLCV+39 43 1.1k 10mo

Related topics — sharing the tags data table, UV & DAD detection, peak integration

TopicParticipantsRepliesViewsActivity
Interpreting a composition change that is within the error bars
On the subject in the title: Interpreting a composition change that is within the error bars Working notes rather than a conclusion. Longitudinal report with the method stated, because a number without a…
VBWMDMMEK+18 22 5.8k 12mo
Injection volume, overload, and peak distortion — one year on
Injection volume, overload, and peak distortion — one year on Writing it up because I had to work it out twice and would rather nobody else did. A documentation question rather than an analytical one. I have…
DTCNFEGFZV+4 8 1.2k 4mo
Coming back to: Specificity, linearity, accuracy, precision, range, robustness — with real criteria
On the subject in the title: Specificity, linearity, accuracy, precision, range, robustness — with real criteria Working notes rather than a conclusion. Posting the method first, because I know what the first…
AWHNFJCOT+93 99 1.4k 6d
Pre-registering a personal experiment, seriously — a second dataset
Posting this under the heading it deserves: Pre-registering a personal experiment, seriously — a second dataset Everything below is what sits behind that. I have seen STEP 8 ( JAMA , 2022) cited in support of…
DMVKAFCVCL+60 66 35k 3mo
Detection wavelength and why 214 nm and 280 nm disagree
On the subject in the title: Detection wavelength and why 214 nm and 280 nm disagree Working notes rather than a conclusion. Posting the method first, because I know what the first three replies will…
BWZVGFFEDI+78 84 1.7k 8mo